Roland Octapad SPD-20X Owner's Manual page 49

Adjusting the Sensitivity of a Pad or Kick Trigger Unit (TRIG SENS)
This parameter adjusts the sensitivity of a pad or Kick Trigger Unit. Higher values will result in higher
sensitivity (setting range: 1–16). When external pads are connected, you should adjust the relative
sensitivity between the external and on-board pads so as to provide a balanced feel for the entire drum
kit.
1
2
3
When you strike the pad, the strength with which the pad is struck (velocity) is shown in the display.
Striking the pad velocity will be shown on display at a value from 0 to 127. The harder you strike, the
higher the value is.
4
About the Trigger Unit's Rim Sensitivity
For a trigger unit, its rim and head will share the same sensitivity. So is the threshold.
48
In the Edit mode, select the SYSTEM parameter group.
Use [ ] or [ ] to select TRIG SENS.
Strike the pad you wish to edit.
TRIG-SENS
VEL:000
Use PATCH/VALUE [-] or [+] to set the value.
TRIG-SENS
VEL:000
8
8