Page 1
Q2n-4K Firmware Update Guide Copyright (C) 2020 ZOOM Corporation. All Rights Reserved. ● ZOOM Corporation will bear no responsibility for any losses or third-party claims resulting from the use of this software. Moreover, distribution, sale, leasing, rental, alteration, and reverse engineering without permission of this software are prohibited.
Page 2
This guide explains updating the firmware to version 1.10 as an example. Download the firmware update file. Download the ZIP file that contains the firmware update file from the Q2n-4K download page.
Page 3
On Windows Select the folder that contains the downloaded ZIP file. Click ① “Compressed Folder Tools” followed by ② “Extract Extract the ZIP file. all”. This extracts the ZIP file. ① ②...
Page 4
Copy the firmware update file to a microSD card. Copy the “Q2N4K_FW.BIN” file to a microSD card. Copy the firmware update Firmware update file file to a microSD card.
Page 5
On macOS After downloading, open the ① “Downloads” folder, which appears at the right end of the Dock by default. Extract the file. Then, click ②. Downloaded files will be shown. ② ① Copy the firmware update file to a microSD card. Copy the “Q2N4K_FW.BIN”...
Page 6
The following procedures are the same on both Windows and macOS. Install new batteries in the Q2n-4K or connect an AC adapter. NOTE Executing a firmware update is not possible if the remaining battery power is low. Insert the microSD card into the Q2n-4K microSD card slot.