Table of Contents
Advertisement
6.3
INSTALLATION of VDR
Connetions
6.3.1
The VDR video signal (analog RGB) output connector is J605 of RPB CDC-1339 located in the
display unit (processing unit). See the drawing below.
When JRC's VDR is used, by connecting it to TB604 (5, 6) MNT TX+/- of radar terminal board circuit
CQD-2128 located in the display unit (processing unit), it is possible to use the online maintenance
function. To know connecting method to VDR, see VDR's installation manual (7ZPJD0389D).
TB604 (5, 6)
MNT TX+/-
Fig 6-35 VDR connection connector / terminal block
6-33
J605
Advertisement
Table of Contents
