Dometic PR2500 Installation Manual page 18

PR2000_PR2500-I-16S.book Seite 18 Donnerstag, 5. Oktober 2017 10:15 10
Connecting the awning (only PR2500)
• Observe the required cable cross section when connecting to the power supply:
Cable length
2 m
4 m
6 m
8 m
Legend to fig. 8, page 7:
No. Description
1
2
3 on
4 rd
5 bk
6 bu
7 bn
8 bk
9 rd
10
11
Installing the wall switch
➤ Find a suitable location inside the motor home, out of direct sunlight, to install the
switch.
Installing the receiver of the remote control and connecting the electrical
connections
➤ Find a suitable location inside the motor home, out of direct sunlight, to install the
mounting bracket for the remote control.
➤ Connect the motor with the remote control in accordance with the applicable
electrical engineering regulations and the circuit diagram (fig. 8, page 7).
18
Receiver
3 A fuse for LED awning light (optional)
Orange line for D+ connection
Red line for LED awning light (optional)
Black line for LED awning light (optional)
Blue line for motor connection
Brown line for motor connection
Black line for power supply
Red line for power supply
Main switch
15 A fuse for main switch
Required cable cross section
1.5 mm²
2.5 mm²
4.0 mm²
6.0 mm²
PR2000, PR2500
EN