Default Settings For Tacacs; Configuring Tacacs; Tacacs+ Server Configuration Process - Cisco Nexus 9000 Series Configuration Manual

Default Settings for TACACS+

Default Settings for TACACS+
This table lists the default settings for TACACS+ parameters.
Table 8: Default TACACS+ Parameters Settings
Parameters
TACACS+
Dead timer interval
Timeout interval
Idle timer interval
Periodic server monitoring username
Periodic server monitoring password
Privilege level support for TACACS+ authorization

Configuring TACACS+

This section describes how to configure TACACS+ on a Cisco NX-OS device.
Note If you are familiar with the Cisco IOS CLI, be aware that the Cisco NX-OS commands for this feature might
differ from the Cisco IOS commands that you would use.

TACACS+ Server Configuration Process

Step 1 Enable TACACS+.
Step 2
Establish the TACACS+ server connections to the Cisco NX-OS device.
Step 3 Configure the secret keys for the TACACS+ servers.
Step 4
If needed, configure TACACS+ server groups with subsets of the TACACS+ servers for AAA authentication methods.
Step 5 (Optional) Configure the TCP port.
Step 6
(Optional) If needed, configure periodic TACACS+ server monitoring.
Step 7 (Optional) If TACACS+ distribution is enabled, commit the TACACS+ configuration to the fabric.
Cisco Nexus 9000 Series NX-OS Security Configuration Guide, Release 9.x
72
Default
Disabled
0
minutes
5
seconds
0
minutes
test
test
Disabled
Configuring TACACS+