Setting The Mdc (Multiple Display Control) - Samsung PPM50M7F Owner's Instructions Manual

Setting the MDC (Multiple Display Control)

This function enables you to easily control the connected
PDP Displays on the PC by specifying IDs to connected PDP
Displays.
1 Press the MENU button to display the menu.
2 Press the ▲ or ▼ button to select Function, then press the
ENTER button.
3 Press the ▲ or ▼ button to select Multi Control, then press
the ENTER button.
4 Select the required option by pressing the ▲ or ▼ button, then
press the ENTER button.
Available options: ID Setup(00~99), ID Input
5 When you are satisfied with your setting, press the ENTER
button.
➢
Enter ID input number by using the numeric buttons.
➢
Select the ID setup number by using the numeric buttons.
6 Press the EXIT button to exit.
➢
To operate the multi control function, PDP1 and PDP2 should
be set in the ID Setup mode. When entering the ID Input
number of PDP1 while the PDP Display is set in the ID Input
mode, only PDP1 is switched to the Menu screen and you can
operate the remote control. At this time, PDP2 doesn't operate
with the remote control and displays the standby mode of ID
Input.
➢
For further details, refer to the MDC program guide.
➢
You can download the MDC program from the
"www.samsung.com" download center.
➢
You can select these options by simply pressing the MDC
(Multiple Display Control) button on the remote control.
English - 24
Function
Safety Lock
Multi Control
Video Wall
Fan : Off
Move Enter Return
Multi Control
ID Setup : 00
ID Input : --
Move Enter Return
Multi Control
ID Setup : 00 00
ID Input : --
Move Enter Return
Multi Control
ID Setup : 00
ID Input : --
--
0..9 : Enter ID Input Number Return





