Time Features - Samsung PPM50M7F Owner's Instructions Manual

Time Features

1 Press the MENU button to display the menu.
2 Press the ▲ or ▼ button to select Setup, then press the
ENTER button.
3 Press the ▲ or ▼ button to select Time, then press the
ENTER button.
4 Select the required option by pressing the ▲ or ▼ button,
then press the ENTER button.
Available options: Clock Set, Sleep Timer, Timer1, Timer2,
Timer3
5 When you are satisfied with your setting, press the
ENTER button.
6 Press the EXIT button to exit.
 Clock Set
You can set the PDP Display clock so that the current time
is displayed when pressing the INFO button on the remote
control. You must also set the time if you wish to use the
automatic on or off timers.
− Press the ◄ or ► button to select Month, Day, Year, Hour,
or Minute.
Set these by pressing the ▲ or ▼ button.
➢
You can set the Month, Day, Year, Hour, and Minute directly by pressing the numeric buttons
on the remote control.
➢
In the event of a power interruption or the set being turned off at the supply, the settings for the
Clock will be lost.
 Sleep Timer
You can select a time period of between 30 and 180 minutes after which the PDP Display
automatically switches to standby mode.
− Select the preset time interval (Off, 30, 60, 90, 120, 150, 180) for staying on by pressing the
▲ or ▼ button.
 Timer1 / Timer2 / Timer3
You can set the On/Off timers so that the PDP Display will switch on or off automatically at the time
you select.
☛
You must set the clock first.
− Press the ◄ or ► button to select the required item below.
Press the ▲ or ▼ button to adjust to the setting satisfied.
On Time : Select hour, minute, and No/Yes. (To activate timer with the setting satisfied, set to
Yes.)
Off Time : Select hour, minute, and No/Yes. (To activate timer with the setting satisfied, set to
Yes.)
Repeat : Select Once, Everyday, Mon - Fri, Mon - Sat, or Sat - Sun.
Volume : Select the required volume level.
Source : Select the required external device.
➢
You can set the hour, and minute directly by pressing the number buttons on the remote control.
☛
Auto Power Off
When you set the timer "On", the PDP Display will eventually turn off, if no controls are operated for 3
hours after the PDP Display was turned on by timer. This function is only available in timer "On" mode
and prevents overheating, which may occur if a PDP Display is on for too long time.
English - 20
Setup
Screen Burn Protection
Language : English
Time
Game Mode : Off
Blue Screen : Off
Melody : Off
PC
Home Theatre PC : Off
 More
Move Enter Return
Time
Clock Set : −− : −−
Sleep Timer : Off
Timer1 : Inactivated
Timer2 : Inactivated
Timer3 : Inactivated
Move Enter Return












