Silent Mode Switch Connection - Raymarine AIS700 Installation Instructions Manual

4.9 Silent mode switch connection

In Silent mode your AIS700 will stop transmitting position data and operate as a receiver only.
Silent mode can be enabled using a connected MFD and by connecting a switch to the relevant
wires on the Power/data cable. Please refer to your MFD's operation instructions for details on
enabling silent mode.
Note: A silent mode switch will override an MFD's Silent mode setting.
1. Power/data cable (supplied)
2. Light Green wire
3. Orange wire
4. Switch (not supplied)
Crimp or solder wire connections and ensure suitable insulation from water ingress.
38