ESIE17-20A
7.6.14 Low Pressure Sensor Abnormality
JC
Error Code
LRMEQ3~4BY1
Applicable
Models
Error is detected from pressure detected by low pressure sensor.
Method of Error
Detection
When the low pressure sensor is short circuit or open circuit.
Error Decision
(Not less than 1.8MPa, or -0.1MPa or less)
Conditions
Defective low pressure sensor
Supposed
Connection of high pressure sensor with wrong connection
Causes
Defective outdoor unit PCB
Defective connection of low pressure sensor
Piping with wrong connection
Air Cooled Refrigeration Condensing Unit
Troubleshooting
95