Samsung HP-P5581 Owner's Instructions Manual page 41

Press the or button to select the antenna
3
connection, then press the ENTER button.
Notes
• Air : "Air" antenna signal.
• Cable : "Cable" antenna signal.
• Air+Cable : "Air" and "Cable" antenna signals.
If the CableCARD is inserted into the "CableCARD"
slot on the rear panel, "Cable" and "Air+Cable"
are not available.
When selecting Cable TV system :
Press the or button to select "Cable", then press the
ENTER button.
Press the or button to select "STD", "HRC", or
"IRC", then press the ENTER button.
Note
• STD, HRC, and IRC identify various types of cable
TV systems. Contact your local cable company to
identify the type of cable system that exists in your
particular area. At this point the signal source has
been selected. Proceed to "Storing Channels in
Memory".
T V Auto Program
Select the antennas to memorize
Air
Cable
Air + Cable
Move Enter
T V Auto Program
Select the antennas to memorize
Air
Cable
Air + Cable
Move Enter
T V Auto Program
Select the cable system.
STD
HRC
IRC
Move Enter
Start
Start
Start
Return
Start
Start
Start
Return
Return
41