Samsung HP-P5581 Owner's Instructions Manual page 11

¸ MTS button
Press to choose stereo, mono or Separate Audio
Program (SAP broadcast).
˛ PIP button
Activates picture in picture.
◊ ASPECT button
Press to change the screen size.
± STILL button
Press to pause the current screen.
≠ DNIe button
Activates DNIe (Digital Natural Image engine).
– SRS button
Selects TruSurround XT mode.
— SET button
Used during set up of this Samsung remote control,
so that it will work compatibly with other devices
(VCR, Cable Box and DVD).
÷ SLEEP button
Press to select a preset time interval for automatic
shut off.
® PIP control buttons
CH , : Displays the available channels in
sequence. (These buttons change
channels in the PIP window only.)
∑ CAPTION button
Controls the caption decoder.
µ VCR, DVD control buttons
Controls VCR tape or DVD disc functions: Stop,
Rewind, Play/Pause, and Fast Forward.
¥ RESET button
If your remote control is not functioning properly, take
out the batteries and press the reset button for about
2~3 seconds. Re-insert the batteries and try using the
remote control again.
1
Slide the back cover
to open the battery
compartment of the
remote control.
Remote Control Operation Range.
You can use your remote control within a distance of 23 feet and an angle of 30 degrees
from the left and right sides of the PDP's remote control receiver.
Installing the Batteries in Your Remote Control
2
Install two AAA size batter-
ies. Make sure to match the
"+" and "-" ends of the bat-
teries with the diagram
inside the compartment.
FAV. CH CH. LIST PIP
ASPECT STILL SLEEP
SRS
3
Slide the cover back into
place.
11