Advertisement
-Digimax210SE(72~) 00.10.24 8:35 AM D‰¿Ã¡ˆ116
H OW TO USE TWAIN DRIVER
Select [Samsung Digimax210SE Serial
jack for Macintosh, or select [Samsung Digimax210SE USB
connecting jack. Then, the selection of TWAIN Source for this camera is completed.
This will specify the information of the selected image.
(image size, file format, lock/unlock, file size)
This will erase the image.
This will erase all the images stored in camera.
This will cancel TWAIN Acquire instruction.
This will bring the image from the camera to the program.
S e a r c h i n g
This will enable you to search for the images.
(via First
,Up
i m a g e
1 1 6
] if your computer Communications connecting
] if your computer has USB
, Down
, Last
)
H OW TO SOLVE THE PRO B L E M S
Solutions for Macintosh-based Programs
Type 1. The memory is not enough or the memory is abnormal.
¢— End the program you are using and run the program again.
Begin the Mac again if you need.
Type 2. This the error that happens when you first set up the USB port or
communication port.
¢— You cannot use the Samsung Digimax 210SE TWAIN Driver in the several
programs at the same time. Thus, end the program you are using when it is
being used in other programs. You cannot use the Samsung Digimas 210SE
Tool Driver in the several programs at the same time when you use USB
port. Run the application program again if the DirectDown is running.
Begin the Mac again if you need.
1 1 7
Advertisement
