Stokke Sleepi Mini User Manual page 52

IMPORTANT, RETAIN FOR FUTURE REFERENCE. READ CAREFULLY!
GB/IE
Congratulations with your new STOKKE® SLEEPI™!
With Stokke® Sleepi™ you have a bed that can be used from birth and it grows
with your child.
Stokke® Sleepi™ Mini
• When a child is able to sit, kneel or to pull itself up, the Mini shall not be used
anymore for this child.
• Make sure that the distance from the mattress to the top of the Mini is never
less than 20 cm. You will have no problems if the original mattress from STOKKE
is used.
• Do not let other children play unsupervised near the Mini.
• Make sure the Mini is locked in a fixed position when a child is unsupervised in it.
Stokke® Sleepi™ Bed
• The cot base height can be adjusted at all four basic heights. Make sure that the
distance from the mattress to the top of the cot is never less than 30 cm in the
highest position and 50 cm in the lowest position. This level is marked at the cot
end ( ). You will have no problems if the original mattress from STOKKE is used.
WARNING
Read these instructions carefully and follow them in detail to ensure
that the safety features of the Mini and cot are not compromised.
Keep these instructions for later use. Save the Allen key for later use.
Re-tighten all screws 2-3 weeks after assembly.
Right of complaint and Extended Warranty
Applicable worldwide in respect of the Stokke® Sleepi™, hereinafter
referred to as the product.
RIGHT OF COMPLAINT
The customer has a right of complaint pursuant to the consumer protection legislation
applicable at any given time, which legislation may vary from country to country.
Generally speaking, STOKKE AS does not grant any additional rights over and above
those laid down by the legislation applicable at any given time, although reference is
made to the "Extended Warranty" described below. The rights of the customer under
the consumer protection legislation applicable at any given time are additional to those
under the "Extended Warranty", and are not affected thereby.
STOKKE® "EXTENDED WARRANTY"
However, STOKKE AS, Parkgata 6, N-6003 Ålesund, Norway, grants an "Extended
Warranty" to customers who register their product in our Warranty Database. This
may be done via our web page www.stokkewarranty.com. Upon registration, a
warranty certificate will be issued and sent to the customer electronically (e-mail)
or by ordinary mail.
Registration in the Warranty Database entitles the owner to an "Extended War-
ranty" as follows:
• 7-year warranty against any manufacturing defect in the product.
52
• The lowest position of the cot base is always the safest. As soon as the baby can
sit up or pull itself up, the cot base must be lowered.
• Make sure to keep medication, string, elastic, small toys or small items such as
money out of reach from any position in the cot.
• To prevent injuries from falls when your child can climb in and out of the bed
by itself, you shall no longer use the Sleepi™ Bed as a cot. You can consider
removing one side of the cot and adjust the cot base to the lowest position.
This way your child can climb safely in and out of the cot by itself. If you do this
it is important to remove the wheels.
Cleaning and maintenance
MATTRESS: Mattress cover: Washable at 60°C. Stretch while wet. Do not use
tumble drier.
Foam: Can be heat treated in 60°C and washed/flushed in hot water. After a
pee accident, the mattress should always be washed; pee is excellent growth
media for fungi.
WOOD: Wipe with a clean damp cloth, wipe off excess of water. We do not recom-
mend any use of detergent. Colours may change if they are exposed to the sun.
• When assembling the Mini or cot do not tighten the screws until the
whole unit is assembled. Doing this ensures you the easiest way to
assemble.
• Make sure the Mini or cot is placed on a level and stable surface. After
assembly, check and tighten all fittings and screws. Fittings and screws
The "Extended Warranty" also applies if the product has been received as a gift or
purchased second-hand. Consequently, the "Extended Warranty" may be invoked by
whoever is the owner of the product any given time, within the warranty period, and
subject to the warranty certificate being presented by the owner.
The STOKKE® "Extended Warranty" is conditional upon the following:
• Normal use.
• The product only having been used for the purpose for which the product is intended.
• The product having undergone ordinary maintenance, as described in the main-
tenance/instruction manual.
• Upon the "Extended Warranty" being invoked, the warranty certificate shall be
presented, together with the original date-stamped purchase receipt. This also
applies to any secondary or subsequent owner.
• The product appearing in its original state, hereunder that the only parts used
have been supplied by STOKKE® and are intended for use on, or together with, the
product. Any deviations here from require the prior written consent of STOKKE®.
• The serial number of the product not having been destroyed or removed.
The STOKKE® "Extended Warranty" does not cover:
• Issues caused by normal developments in the parts making up the product (e.g.
colouration changes, as well as wear and tear).
• Issues caused by minor variations in materials (e.g. colour differences between parts).
NORMAL USE: Always remove the duvet in the morning and let the bed and duvet
"cool down" and dry up.
Recommended mattress size
This cot has been manufactured for use with a mattress which measures 677 mm
wide by 1210 mm long and 80 mm in thickness for Sleepi and 573 mm wide by 733
mm long and 80 mm in thickness for Mini and have the shape of the cot/mini-cot.
The width and length are specified because it is important that the gaps between
the mattress and the sides and ends of the cot will not exceed 30 mm. This is to
minimize the risk of a child's limb becoming caught in the gap. The thickness of
the mattress has been specified to ensure that the depth of the cot is greater than
500 mm with the mattress base in the lower position to minimize the risk of a
child climbing or falling out of the cot.
Information about your new mattress
• INSTRUCTIONS FOR USE: Hold the zipper end with one hand. As the zipper
puller is sewn on inside, use the other hand to open the zipper from mesh
side.
• Compressed mattresses regain their original shape after 72-96 hours
should be checked regularly and retightened as necessary. Loose screw
connections or parts could lead to the baby trapping a body part, or
clothing (e.g. strings, necklaces, ribbons for babies' dummies, etc.)
which would pose a risk of strangulation.
• Never place the Mini or cot by an open fire or sources of strong heat such
as electric bar fires, gas fires, etc. due to the risk of fire.
• Issues caused by extreme influence from external factors like sun/light, temperature,
humidity, environmental pollution, etc.
• Damage caused by accidents/mishaps – for example any other objects having
bumped into the product or any person having overturned the product by colliding
with it. The same applies if the product has been overloaded, for example in terms
of the weight placed on it.
• Damage inflicted on the product by external influence, for example when the
product is being shipped as luggage.
• Consequential damage, for example damage inflicted on any persons and/or
any other objects.
• If the product has been fitted with any accessories that have not been supplied by
Stokke, the "Extended Warranty" shall lapse.
• The "Extended Warranty" shall not apply to any accessories that have been purchased
or supplied together with the product, or at a subsequent date.
STOKKE® will under the "Extended Warranty":
• Replace or – if STOKKE® thus prefers – repair the defective part, or the product
in its entirety (if necessary), provided that the product is delivered to a reseller.
• Cover normal transport costs for any replacement part/product from STOKKE® to
the reseller from whom the product was purchased. – No travel costs on the part
of the purchaser are covered under the terms of the warranty.
• Reserve the right to replace, at the time of the warranty being invoked, defect parts
by parts that are of approximately the same design.
Stokke Sleepi user guide
® ™
• Polyurethane-foam has a distinctive odour which may linger a few days after
unpacking. The odour will disappear. Airing and vacuuming the mattress will
help to eliminate the odour.
• The foam reacts to he ultraviolet light from the sun and the oxygen from the air
and will turn yellow with time.
• Do not use the Mini or cot if any part is broken, torn or missing, and use
only spareparts approved by STOKKE®.
• Do not leave anything in the cot or place the cot close to another product,
which could provide a foothold or present danger of suffocation or
strangulation, e.g. strings, blind/curtain cords etc.
• Do not use more than one mattress in the cot.
• Reserve the right to supply a replacement product in cases where the relevant
product is no longer being manufactured at the time of the warranty being invoked.
Such product shall be of corresponding quality and value.
How to invoke the "Extended Warranty":
Generally speaking, all requests relating to the "Extended Warranty" shall be made
to the reseller from whom the product was purchased. Such request shall be made as
soon as possible after any defect has been discovered, and shall be accompanied by
the warranty certificate as well as the original purchase receipt.
Documentation/evidence confirming the manufacturing defect shall be presented,
normally by way of the product being brought along to the reseller, or otherwise
being presented to the reseller or a STOKKE® sales representative for inspection.
The defect will be remedied in accordance with the above provisions if the reseller
or a STOKKE® sales representative determines that the damage is caused by a manu-
facturing defect.
EN 716:2017