R
R
R
R
HOW TO SEW A ROLLED HEM
–
This machine can sew four types of rolled hems.
–
Rolled hemming is done by rolling and
overedging the fabric edge.
–
Light weight fabrics such as lawn, voile, organdy,
crepe, etc. perform the best.
–
Rolled hemming is not suited for heavy or stiff
fabrics.
PLEASE NOTE:
Rolled hemming can only be performed with the
overlock right needle.
PLEASE NOTE:
For a beautiful rolled hem thread the upper
looper with wooly nylon and the needle and
lower looper with lightweight regular thread.
Machine set up
CAUTION:
Be sure to turn off power switch.
–
Remove the overlock left needle.
–
Move seam width finger knob to setting R.
–
Align left face of seam width finger support
plate with R mark on stitch plate by turning
seam width adjustment knob, as required.
–
Set stitch length dial to 1–2 and a fine seam will
be sewn.
Needle:
ELx705
Thread:
A variety of thread combinations can be used for rolled
hemming.
39