1
1
N
R
N
R
14
UPPER LOOPER CONVERTER
(ULC)
2
Be sure to turn off power switch.
2
When not threading the upper looper, the upper
looper converter must be engaged into the upper
looper eye.
Use the upper looper converter
–
To engage the upper looper converter, insert
the sharp part
–
A raised point located in the trough of upper
looper converter must be inserted and fixed
in the eye of the upper looper converter.
Disengage To Upper Looper
When using the upper looper, the upper looper
converter must be disengaged.
–
To disengage the upper looper converter, raise
the handle
picture.
3
3
STANDARD OVERLOCK AND
ROLLED HEM STITCHING
Sew Standard Overlock
Set seam width finger knob to "N" to move seam width
finger to standard overlock sewing position.
Be sure to push seam width finger knob as far as
it will go in the direction of setting "N".
CAUTION:
(1)
into the eye of upper looper.
(3)
of upper looper according to
PLEASE NOTE:
(2)