Cut-Offs Bin - Bernina Bernette Funlock b44 Instruction Manual

1
3
2
4
5
• Polarized plug information
(FOR USA & CANADA ONLY)
This appliance has a polarized plug (one blade wider
than the other). To reduce the risk of electric shock,
this plug is intended to fit in a polarized outlet only way.
If the plug does not fit fully in the outlet, reverse the
plug.
If it still does not fit contact a qualified electrician to
install the proper outlet. Do not modify the plug in any
way.
CAUTION:
– Be sure that the electrical voltage of the
electric outlet (wall receptacle) is the same as
the rated voltage of the motor.
– Handle the foot controller with care and avoid
dropping it on the floor. Be sure not to place
anything on top of it when not in use.
– Disconnect the power line plug from the
electric outlet when changing needles,
presser feet or when leaving the machine
unattended. This eliminates the possibility of
starting the machine by accidentally pressing
the controller.

Cut-offs Bin

• Replacement
– Insert the Cut-offs Bin
cover.
– Be sure to press the Cut-offs Bin downward
– Be sure the left side of Cut-offs Bin
mounted near the cutter where the scraps drop.
• Removal
– Pull the Cut-offs Bin upward as the instruction
(4)
.
(5)
– To remove , hold the Cut-offs Bin as shown
and pull it outward.
(1) under the looper
(2)
.
(3)
is
11