Samsung SHR-4081N/P User Manual page 88

SHR-4081N/P USER'S MANUAL
● Smart Viewer Version
- Smart Viewer Version and system requirements will be displayed.
● DVR Version
SHR-4081N/P
- DVR Version not only displays the connected DVR(SHR-4081N/P) name if any
DVR(SHR-4081N/P) is being connected with Smart Viewer or the name of
DVR(SHR-4081N/P) composing a site if any DVR(SHR-4081N/P) is being
connected with the site but also displays DVR(SHR-4081N/P) S/W version.
- Smart Viewer will be expressed in gray when disconnected from
DVR(SHR-4081N/P) and Status will be marked as "Not Connected".
- Each DVR Version has a check box, which is used for S/W Upgrade.
● DVR(SHR-4081N/P) S/W Upgrade
- Smart Viewer upgrades on-line DVR(SHR-4081N/P) S/W remotely.
! Check a DVR(SHR-4081N/P) to be upgreaded among DVRs(SHR-4081N/P)
on line.
SHR-4081N/P
10-57
English
@ Click the following button to open the "SHR-4081N/P Firmware" file in tgz
format.
SHR-4081N/P Smart Viewer
SHR-4081N/P
# Press the [Upgrade] button to transmit a file to the selected DVR
(SHR-4081N/P) and start upgrade of DVR(SHR-4081N/P) S/W.
$ The progress of file transmission and upgrade will be displayed at the bottom.
Caution Caution
Be sure to suspend all the DVR system functions in action such as recording, MENU,
backup, and play before you upgrade DVR(SHR-4081N/P) S/W.
Never try to turn the DVR(SHR-4081N/P) power off during such S/W upgrade.
S/W upgrade requires about 5 minutes.
If S/W upgrade is suspended accidentally, the previous S/W will be left intact.
Note
Note
The new Firmware necessary for DVR(SHR-4081N/P) S/W upgrade shall be downloaded from
CCTV Part in Products Section at http://www.samsung.com
10-58
English