Table of Contents
Advertisement
SHR-4081N/P USER'S MANUAL
! PRESET
- If you press the PRESET button, a window for PRESET setup pops up.
a
b
c
Note
Note
! The PRESET function is supplied to all camera.
You are allowed to set up no more than 20 PRESET items.
But, the AD Protocol camera supports up to 7 PRESET items.
@ AUTOPAN : The camera executes this function, reciprocating between Start and End.
# SCAN : The camera executes this function, circulating the PRESET setup positions.
$ PATTERN : The camera executes this function, following user defined route.
Note
Note
The name of @,#, and $ functions varies depending on the camera and some
cameras does not support any of those functions.
- The Samsung camera supports all the functions and names.
- The Panasonic camera supports all the functions, but with different names.
@ SEQUENCE # AUTOPAN $ SORT
- The PELCO camera supports all the functions, but with different names.
@ FRAME SCAN # AUTO SCAN $ PATTERN
- Other cameras do not support the @AUTOPAN, #SCAN, and $PATTERN
functions.
10-21
English
a
If you click the current PRESET number and
name, the camera will move accordingly.
b
You can delete the selected or all PRESET
setup values.
c
You can set up a new PRESET number and
name.
●
Self Menu Setup of PTZ device
1
! You may set up the Function Menu in PTZ device.
1
! This is a Menu screen supplied by the camera itself, seen from Viewer.
@ Use the
/ / /
button for the movement between menus.
# This is a button for the role of Enter.
Note
Note
The Camera Menu Setup function is supported by Samsung and Panasonic.
Caution
Caution
As far as SHR-4081N/P uses the PTZ device control related functions, Smart Viewer
can not control PTZ device.
The PTZ device control related functions are authorized with the user with Admin
authority.
10-22
English
Advertisement
Table of Contents
