Table of Contents
Advertisement
SHR-4081N/P USER'S MANUAL
System Information and Setup
Software Version
●
: Displays the current version. Setup is not available.
Broadcast Format
●
: Displays the current Format(NTSC/PAL). Setup is not available.
Mac Address
●
: 6 Byte hardware address. Setup is not available.
Device Erase
●
Erases the data in the ATA / IEEE1394 / USB / USB memory.
Check the box that you want to delete and press "OK".
Data is undeletable during Backup.
●
USB S/W Upgrade
When there is no device, USB S/W Upgrade is failed.
Note 1
Note 1
Being a physical hard disk inside the SHR-4081N/P main body connected by an IDE cable, this
stores data.
[External HDD]
Being a physical hard disk connected with the port and terminal in the back of the
SHR-4081N/P main body, this stores data.
This can be used as Extended HDD or Backup HDD.
- Extended HDD : Supplements Internal HDD quantity. Connected, it takes the place of Internal
HDD.
- Backup HDD : Backs up the data recorded in the set.
Note 2
Note 2
[ATA]
Usage : Internal HDD
This is a physical hard disk connected with SHR-4081N/P through the IDE cable.
[USB]
Usage : External HDD (Extended HDD or Backup HDD)
A physical hard disk connected with the USB port in the back of the SHR-4081N/P main body
[IEEE1394]
Usage : External HDD (Extended HDD or Backup HDD)
A physical hard disk connected with the IEEE1394 port in the back of the SHR-4081N/P main
body
Note 3
Note 3
[USB S/W upgrade]
1. You can download the data(tgz file) for upgrade from www.samsung.com, CCTV Part.
2. The USB memory should have only one tgz file for upgrade.
3. In case of other memory format than supported by SHR-4081 model, please delete the
memory and set it up according to the set format.
5-7
English
Caution
Caution
[HDD Erase]
Data will not be deleted in backup or recording process.
Please be sure to suspend backup or recording before you delete any data.
If the recording is in progress, stop the recording to delete a data.
[USB S/W Upgrade]
You may download the software for upgrade from CCTV Part of http://www.samsung.com.
If the USB memory to be upgraded is not in a format supported by the DVR set, the upgrade
cannot be done. In this case, please use "Remove Devices" from "System Information and
Settings" in Menu 5-7. There should be only one file for upgrade in the USB memory.
HDD/External Device Setup
●
HDD Information
Displays the number, quantity, and status of ATA, IEEE1394, and USB.
Setup is not available.
Status : Internal HDD, External HDD, Backup HDD
●
External HDD setup
1. Backup/External
You are able to determine the usage of IEEE1394 and USB.
Not Defined ➝ When the connected HDD usage is not defined.
Expressed in External or Backup.
No Device ➝ When no HDD is connected. You are able to press right TAB after you
connect HDD.
External ➝ When the connected HDD is set to External. It may used as a back
up HDD if you press the "Enter" button and turn to Backup.
Backup ➝ When the connected HDD is set to Backup. It may used as an
External HDD if you press the "Enter" button and turn to External.
2. Hot Plug - Connect/Disconnect
You may connect or disconnect IEEE1394 Hard Disk while power is supplied to the
SHR-4081N/P main body.
① As for connecting, connect IEEE1394 Hard Disk with the SHR-4081N/P main
body and press "Connect". Pressing "Connect" makes the SHR-4081N/P
main body recognize all connected IEEE1394 Hard Disks.
➁ As for disconnecting, be sure to press "Disconnect" and detach IEEE1394
Hard Disk from the SHR-4081N/P main body safely.(Be sure to pause recording
or backup process.) Pressing "Disconnect" cancels and detaches all connected
IEEE1394 Hard Disk.
5-8
English
Advertisement
Table of Contents
