DVD-Recorder
Audio
No Disc
Timer Rec.
Digital Output
: PCM
Setup
DTS
: Off
Dynamic Compression : On
MOVE
ENTER
RETURN
EXIT
DVD-Recorder
Audio
No Disc
Timer Rec.
Digital Output
: PCM
PCM
DTS
: Off
Bitstream
Setup
Dynamic Compression : On
MOVE
ENTER
RETURN
EXIT
DVD-Recorder
Audio
No Disc
Timer Rec.
Digital Output
: PCM
Setup
DTS
: Off
Off
Dynamic Compression : On
On
MOVE
ENTER
RETURN
EXIT
DVD-Recorder
Audio
No Disc
Timer Rec.
Digital Output
: PCM
DTS
: Off
Setup
Dynamic Compression On
Off
On
MOVE
ENTER
RETURN
EXIT
Setting Up the Audio Options
You can connect the DVD-R155 to an external audio amplifi er or a
Home Theater system.
This allows you to setup the audio device and sound status settings
►
depending on the audio system in use.
►
►
1. With the unit in Stop mode/No Disc mode, press the MENU button on
the remote control.
2. Select Setup using the ▲▼ buttons, then press the ENTER or ►
button.
3. Select Audio using the ▲▼ buttons, then press the ENTER or ►
button.
4. Select the sub menu(Digital Output, DTS, Dynamic Compression)
using the ▲▼ buttons, then press the ENTER or ► button.
Select the item that matches the audio connection you've selected
on pages 20~22.
Digital Output
• PCM : Converts to PCM(2CH) 48kHz audio.
►
Select PCM if your amplifi er system supports stereo and/or Dolby
►
Prologic.
►
• Bitstream : Outputs Bitstream.
Select Bitstream if your amplifi er system supports multi channel digital
audio surround decoding such as Dolby Digital and/or DTS.
DTS
• On : Outputs DTS bitstream. (via Digital Audio Output)
Select DTS when connecting to a digital amp with a DTS decoder.
►
►
• Off : Doesn't output DTS bitstream.
►
• When a DTS soundtrack is played, sound is not output from the Analog Audio
Output.
Dynamic Compression
This is only active when a Dolby Digital signal is detected.
►
• On : When movie soundtracks are played at low volume or from small
►
speakers, the system can apply appropriate compression to make low-
►
level content more intelligible and prevent dramatic passages from
getting too loud.
• Off : You can enjoy the movie with standard Dynamic Range.
5. Select the desired item(PCM, Bitstream, DTS-Off, DTS-On, Dynamic
Compression-Off or Dynamic Compression-On) using the ▲▼
buttons
Then press the ENTER or ► button.
English - 30