Quick Recording Setting; Anynet+(Hdmi-Cec) - Samsung DVD-R155 Instruction Manual

DVD-Recorder System
DVD-RW(VR)
Title List
CM Skip Time : 15 Sec
EP Mode Time : 6 Hours
Playlist
Chapter Creator : Off
Disc Manager
Quick Recording : Off
Timer Rec.
Anynet+(HDMI-CEC) : On
Setup
MOVE ENTER RETURN EXIT
DVD-Recorder System
No Disc
Timer Rec.
CM Skip Time : 15 Sec
EP Mode Time : 6 Hours
Setup
Chapter Creator : Off
Quick Recording : Off
Off

Anynet+(HDMI-CEC)

On
On
MOVE ENTER RETURN EXIT
DVDR
View TV
DVDR Menu
DVDR Operation
Receiver : Off
Setup
Move Enter Exit
TV Menu
▌

Quick Recording Setting

It takes about 10 seconds for a disc to load (initialize) every time
you turn on the unit. To bypass this initialization process, you can
set the Quick Recording feature to On. This enables you to record
►
immediately without having to wait for the disc to load.
►
1. With a disc inserted and the unit in Stop mode, press the MENU button
►
►
on the remote control.
►
2. Select Setup using the ▲▼ buttons, then press the ENTER or ►
button.
You can't use the Setup functions while playing a disc.
3. Select System using the ▲▼ buttons, then press the ENTER or ►
button.
System menu will be displayed.
4. Select Quick Recording using the ▲▼ buttons, then press the
ENTER or ► button.
Quick Recording menu will be displayed.
5. Select On using the ▲▼ buttons, then press the ENTER or ► button.
■ The Quick Recording is set to Off as default.
▌ Anynet+(HDMI-CEC)
Anynet+ is a function that can be used to operate the recorder using
a Samsung TV remote control, by connecting the DVD Recorder to
a SAMSUNG TV using an HDMI Cable. (see page 15) (This is only
►
available with SAMSUNG TVs that support Anynet+.)
►
►
1. With the unit in Stop mode/No Disc mode, press the MENU button on
►
the remote control.
►
2. Select Setup using the ▲▼ buttons, then press the ENTER or ► button.
3. Select System using the ▲▼ buttons, then press the ENTER or ►
button. The system menu will be displayed.
4. Select Anynet+(HDMI-CEC) using the ▲▼ buttons, then press the
ENTER or ► button.
Anynet+(HDMI-CEC) items will be displayed.
5. Select On using the ▲▼ buttons, then press the ENTER or ► button.
Using Anynet+(HDMI-CEC)
1. Connect the recorder to a Samsung TV with an HDMI cable.
(See page 15)
2. Set the Anynet+(HDMI-CEC) to "On" on your DVD Recorder. (see above)
3. Set the Anynet+ function on your TV.
(See the TV instruction manual for more information.)
• You can operate the DVD Recorder by using the TV remote control.
(Available TV buttons :
~ button)
• When you press the Anynet+ button on the TV's remote control, the OSD to the
left will appear.
- DVDR Operation : Same as ANYKEY button (
Recorder remote control.
- DVDR Menu : Same as MENU button (
remote control.
English - 28
, , , , and
) on the DVD
) on the DVD Recorder
buttons,