Table of Contents
Advertisement
2.1.5
EN100-Module
2.1.5.1 Description
The EN100-Module enables integration of the 7SC805 in 100-Mbit communication networks in control and au-
tomation systems with the protocols according to IEC 61850 standard. This standard permits uniform commu-
nication of the devices without gateways and protocol converters. Even when installed in heterogeneous envi-
ronments, MU therefore provides for open and interoperable operation. Parallel to the process control
integration of the device, this interface can also be used for communication with DIGSI and for inter-relay com-
munication via GOOSE.
The GOOSE function can be disabled in a device parameter. For more information, please refer to Section
2.1.1.2.
You can use an optical EN100-Module with 2 Ethernet ports for IEC 61850 in the 7SC805.
2.1.5.2 Information List
No.
009.0100
009.0101
009.0102
SIPROTEC, 7SC805, Manual
C53000-G1140-C380-1, Release date 05.2014
Information
Failure Module
IntSP
Fail Ch1
IntSP
Fail Ch2
IntSP
Type of Information
Failure EN100 Module
Failure EN100 Link Channel 1 (Ch1)
Failure EN100 Link Channel 2 (Ch2)
Functions
2.1 General
Comments
31
Advertisement
Table of Contents
