Table of Contents
Advertisement
Using the index and page functions
Use these to view the desired index and page while playing a DVD-Audio disc.
• The INDEX and PAGE buttons can be used only when
• The INDEX button does not work if a track consists of a
• The PAGE button does not work if the current track does
53
Select using the INDEX
button if a track is divided
into multiple indexes.
Select using the PAGE
button if a track contains
many still images.
playing a DVD-Audio disc.
single index.
not contain still images or if the disc contains a slide-
show. Also, still images may be displayed abnormally
depending on the authoring method.
Speaker Setup
Setting the Speaker Mode
You can set the speaker mode for your current
system.
Initially it is set as follows.
- Front speaker (L/R): Large
- Center speaker: Not found
- Subwoofer: Not found
- Surround speaker (L/R): Not found
• If you have connected the system to a speaker with
low frequencies of 100Hz or below, select "Found
(Large)".
• If you have connected the system to a speaker
without low frequencies of 100Hz or below, select
"Found (Small)".
However, if you don't have a subwoofer connected,
always select "Found (Large)" for Front Speakers
(L/R).
Setting up TEST
• The test output signals will be heard clockwise starting from the Front
Speaker (L). Adjust the channel balance to match the test signal volume
stored in the system.
FRONT (L)
CENTER
FRONT (R)
SURROUND (L).
SUBWOOFER
SURROUND (R)
54
Advertisement
Table of Contents
