Connecting To A Tv; Method 1 Through Video And Audio Outputs - Samsung DVD-HD1000 User Manual

Remote Control
Controlling a TV with the Remote
The remote can also be set up to control most TVs. To program the remote,
use the code that corresponds to your brand.
1
Turn on the TV
2
Point the DVD's remote at the TV.
3
While holding the TV POWER button
down, enter the code for your brand.
4 If the TV turns off, setup is complete.
Enter other codes of the same brand if
the first code does not work.
For Samsung_1 TVs
• While holding down the TV POWER button, enter 0 and then 1.
• The remote may not be able to control every model TV of the brands listed.
If remote does'n operate properly:
• Check the polarity + - of the batteries (Dry-Cell)
• Check if the batteries are drained.
• Check if remote sensor is blocked by obstacles.
• Check if there is any fluorescent lighting nearby.
17 17
TV Codes
Code Brand Code Brand
01 SAMSUNG_1 16 SHARP_1
02 SHARP_2 17 ZENITH
03 SONY 18 LG_3
04 MAGNAVOX 18 DAEWOO_8
05 SANYO_1 20 SANYO_2
06 LG_2 21 EMERSON
07 RCA 22 SHARP_3
08 LG_1 23 SAMSUNG_4
09 TOSHIBA 24 PANASONIC_2
10 HITACHI 25 NOBLEX
11 JVC 26 TELEFUNKEN
12 PANASONIC_1 27 NEWSAN
13 MITSUBISHI_2 28 LOEWE
14 SAMSUNG_2 29 RCA2
15 SAMSUNG_3

Connecting to a TV

Method 1
Method 1
Through Video and Audio Outputs
TV
Video Cable
Audio Cable
1
Connect the DVD player's AUDIO OUT (L/R) and VIDEO OUT to your TV's
AUDIO IN and VIDEO IN.
2
Press the TV/VIDEO button on the remote control to set the TV to "AV1" or
"AV2".
Types of Color Video Signals
• Video (Composite): A single video signal that is a composite of the black and
white information (Y) and the color information (C).
• S-Video: Provides a sharper picture than composite video by separating the
color information (C) from the black and white information (Y).
• Component Video: Provides the most clear and sharp picture by separating the
signal into full-bandwidth black and white information (Y), blue information (Pb),
and red information (Pr).
18