Samsung DVD-F1080W User Manual page 18

C
O N N E C T I O N S
Connecting to an
1
If using a Coaxial cable (not included), connect the
AUDIO OUT (COAXIAL) jack on the rear of the DVD player to
the DIGITAL AUDIO IN (COAXIAL)
2
Using the video signal cable(s), connect the VIDEO,
COMPONENT or HDMI OUT jacks on the rear of the DVD
player to the VIDEO, COMPONENT or HDMI-DVI IN jacks of
your TV as described on pages 12 to 16.
3
Turn on your DVD player, TV, and Amplifier.
4
Press the input select button of the
input in order to hear sound from your DVD
Refer to your Amplifier's user manual to set the Amplifier's
audio input.
Note
- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause
damage to the speakers and your ears.
- Please set the audio in the menu screen according to the Amplifier you have connected. (See pages 48 to 49)
- The position of jacks may vary depending on the Amplifier.
Please refer to the user's manual of the Amplifier.
Audio System (Dolby digital, MPEG2 or DTS Amplifier)
DIGITAL
jack of the Amplifier.
Amplifier to select external
player.
ENG-18
Coaxial Cable
(not included)
Dolby digital or
DTS amp