Samsung DVD-F1080W User Manual page 17

C
O N N E C T I O N S
Connecting to an Audio System (2 Channel Amplifier)
1
Using the audio cables, connect the AUDIO (red and white)
OUT jacks on the rear of the DVD player to the AUDIO (red
and white) IN jacks of the Amplifier.
2
Using the video signal cable(s), connect the VIDEO,
COMPONENT or HDMI OUT jacks on the rear of the DVD
player to the VIDEO, COMPONENT or HDMI-DVI IN jacl of
your TV as described on pages 12 to 16.
3
Turn on your DVD player, TV, and Amplifier.
4
Press the input select button of the
input in order to hear sound from your DVD
Refer to your Amplifier's user manual to set the Amplifier's
audio input.
Note
- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause
damage to the speakers and your ears.
- Please set the audio in the menu screen according to the Amplifier.(See pages 48 to 49)
- The position of jacks may vary depending on the Amplifier.
Please refer to the user's manual of the Amplifier.
Amplifier to select external
player..
ENG-17
RED WHITE
Audio Cable
WHITE
RED
2-Channel stereo amp