Samsung DVD-F1080W User Manual page 16

C
O N N E C T I O N S
Connecting to a TV
1
Using Video/Audio cables, connect the
(red and white) OUT jacks on the rear of the DVD player to the
VIDEO (yellow)/AUDIO (red and white) IN jacks of your
2
Turn on your DVD player and TV.
3
Press the input selector button on your
the Video signal from the DVD player appears on the TV
screen.
Note
- Noise may be generated if the audio cable placed too close to the power cable.
- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 17 to 18)
- The number and position of the jacks may vary depending on your TV set. Please refer to the user's manual
of your TV.
- If there is one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) jack of the DVD
player.
- If you press the VIDEO SEL. button when the DVD Player is in stop mode or no disc is inserted, the Video
Output mode changes in the following sequence: (I-SCAN
(Video)
VIDEO (yellow)/AUDIO
TV.
TV remote control until
ENG-16
RED WHITE
Audio
Cable
RED WHITE
➝ P-SCAN).
YELLOW
Video Cable
(Included)
YELLOW