Master Tx Level - Agilent Technologies 8922 Supplementary User's Manual

9. Master Tx level

On a master unit, the Master Tx level field requests a new transmit
level for the uplink master TCH. On a slave unit, this field does not make
this request.
If the instrument is operating in standard mode, setting this field
changes the master mode (see page 35) to MS TX Lev, then calculates
and sets the master's expected input level (see page 34). If the
instrument is operating in compatibility mode, setting this field only
changes the master's expected input level when the control type for the
master is set to MS TX Lev.
NOTE The default is reset when you select the instrument type (see page 24).
Chapter 4
Type
Units
Limits (GSM900)
Limits (E-GSM)
Limits (DCS1800)
Limits (PCS1900)
Default (GSM900)
Default (E-GSM)
Default (DCS1800)
Default (PCS1900)
integer
none (Tx level)
1 thru 19
1 thru 19
0 thru 15
0 thru 15; 30 thru 31
15
15
10
10
Screens
HSCSD screen
33