Connecting To A Tv (Interlace) - Samsung AK68-01770G User Manual

Connecting to a TV (Interlace)

- Connecting to your TV using Component video cables.
- You will enjoy excelllent quality and accurate color reproduction images. Component video
separates the picture element into black and white(Y), blue(P
and clean images. (Audio signals are delivered through the audio output.)
1
Using Component video cables, connect the
COMPONENT VIDEO OUT jacks on the rear of the DVD
player to the COMPONENT IN jacks of your TV.
2
Using the audio cables, connect the AUDIO (red and
white) OUT jacks on the rear of the DVD player to the
AUDIO (red and white) IN jacks of your TV.
Turn on your DVD player and TV.
3
Set the Video Output to I-SCAN (480i) in the Display
Setup menu. (See pages 50 to 51)
4
Press the input selector on your TV remote control until
the Component signal from the DVD player appears on
the TV screen.
Note
- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 15 to 16)
- The component jack of your TV may be marked "R-Y, B-Y, Y" or "Cr, Cb, Y" instead of "P
the manufacturer. The number and position of the jacks may vary depending on the TV set. Please refer to the
user's manual of your TV.
), red(P ) signals to present clear
B R
WHITE
BLUE
RED
RED
Audio Cable
RED BLUE GREEN
WHITE
RED
, P , Y" depending on
R B
GREEN
Component cable
English _13