Basic Functions; Playing A Disc - Samsung AK68-01770G User Manual

basic functions

Playing a Disc

Before Play
- Turn on your TV and set it to the Video Input your DVD player is connected to with your TV's remote
control.
- If you connected the DVD player to an external Audio System, turn on your Audio System and set it to
the correct Audio Input.
After plugging in the player, the first time you press the DVD POWER button, the screen
to the right appears: If you want to select a language, press a
ENTER. (This screen will only appear when you plug in the player for the first time.)
If the language for the startup screen is not set, the settings may change whenever you
turn the power on or off. Therefore, make sure that you select the language you want
to use. Once you select a menu language, you can change it by pressing the
on the front panel of the unit for more than 5 seconds with no disc in the unit. Then the
SELECT MENU LANGUAGE window appears again where you can reset your preferred
language.
Playback
1
Press the OPEN/CLOSE
( ) button,and the tray
opens.
2
Place a disc gently into
the tray with the disc's
label facing up.
3
Press the PLAY/PAUSE
( ) button or OPEN/
CLOSE ( ) button to
close the disc tray.
button, and then press
π/†
button
RESUME function
When you stop disc play, the player
remembers where you stopped, so when you
press the PLAY/PAUSE ( ) button again, it
will pick up where you left off.
English
Français
Deutsch
Español
Italiano
Nederlands
English _17