Setting Up The Speaker Options - Samsung AK68-01477B User Manual

SETTING UP THE SPEAKER OPTIONS

If you have connected this player to an Amp/Receiver or Home theater via the 7.1 channel Analog outputs you need
to set the Speaker Options for the best sound.
1. With the unit in Stop mode, press the MENU button.
Press the ▲▼ buttons to select Setup, then press the
2.
ENTER or ► button.
Press the ▲▼ buttons to select Audio Setup, then press
3.
the ENTER or ► button.
Press the ▲▼ buttons to select Speaker Setup, then
4.
press the ENTER or ► button.
Press the ▲▼◄► buttons to select the desired Speaker,
5.
then press the ENTER button.
When done, use the ▲▼◄► buttons to select Save, then
6.
press the ENTER button.
If you don't want to save your work, use the ▲▼◄►
buttons to select Cancel, then press the ENTER button.
M

Press the RETURN or ◄ button to return to the previous menu.
Speaker Setup
Front (L, R) Large, Small
Center (C) Large, Small, None
Surround (LS, RS) Large, Small, None
Subwoofer (LFE) On, Off
Surround Back
Large, Small, None
(LSB, RSB)
Speaker
•
Large : Delivers full bandwidth sound with bass below 100
Hz.
•
Small : If LFE is on, bass below 100 Hz will be outputted
through a Subwoofer instead of the speakers. If LFE is off
and the Front Speaker is set to Large, sound will be
outputted through the Front Speaker.
• None : Select to disable the speakers.
System Setup
Language Setup
Music
Audio Setup
Setup
No Disc No Disc
Display Setup
HDMI Setup
Network Setup
Parental Setup
System Setup
Language Setup
Music
Audio Setup
Setup
No Disc No Disc
Display Setup
HDMI Setup
Network Setup
Parental Setup
Music Language Setup
Speaker Setup
Audio Setup
Setup
No Disc No Disc
Display Setup
Network Setup
Parental Setup
a Test Tone s Select
Subwoofer Speaker
•
On : Select to use the subwoofer speaker.
•
Off : Select to disable the subwoofer
speaker.
(This option can only be selected when the
Front (L+R) speakers are set to Large.)
Press the RED(A) button
•
A test tone will be sent to L
RSB LSB LS
can make sure the speakers are set up
correctly.
•
To end the test tone, press the RED (A)
button again.
•
The test tone can only be activated when no
discs are in the unit.
•
The test tone outputs through the 7.1 channel
analog outputs only.
PCM Down Sampling : On
Dynamic Compression : On
Speaker Setup
PCM Down Sampling : On
Dynamic Compression : On
Speaker Setup
Front : Small
LFE : On
Center : Small
Surround : Small
Surround Back : Small
Save Cancel
² Return
C R RS
LFE in order so you
English _39