Setting The Remote Control; Regarding The Battery - Samsung AK68-01477B User Manual

remote control

SETTING THE REMOTE CONTROL

You can control certain functions of your TV with this remote control.
Control function buttons include : TV POWER, CH ,., VOL + –, TV MUTE, TV INPUT SEL., DIRECTION/
ENTER button. However, the DIRECTION/ENTER button can only operate when the TV INPUT SEL. button has
been selected.
To determine whether your television is compatible, follow the instructions below.
1. Switch your television on.
2. Point the remote control towards the television.
3. Press and hold the TV POWER button and enter the two-fi gure code corresponding to the brand of
your television, by pressing the appropriate number buttons. (see the next page for the code list).
If your television is compatible with the remote control, it will switch off.
It is now programmed to operate with the remote control.
M

If several codes are indicated for your television brand, try each one in turn until you fi nd one that works.

If you replace the remote control's batteries, you must set the brand code again.
You can then control the television using the following buttons after pressing the TV button.
Button
TV POWER
TV INPUT SEL.
TV VOL (+ –)
TV CH (,.)
TV MUTE
DIRECTION/ENTER
M

The functions listed above will not necessarily work on all televisions. If you encounter problems, operate the
television directly.

REGARDING THE BATTERY

If the remote does not operate properly:
•
Check the polarity + – of the batteries (Dry-Cell)
•
Check if the batteries are drained.
•
Check if remote sensor is blocked by obstacles.
•
Check if there is any fl uorescent lighting nearby.
Dispose of batteries according to local environmental regulations. Do not put them in the
household trash.
18_ remote control
Function
Used to switch the television on and off.
Used to select an external source.
Used to adjust the volume of the television.
Used to select the desired channel.
Used to toggle the sound on and off.
Used to move up/down/left/right (
*(only works under the TV INPUT SEL. button selected)
) and to select a desired item.
▲, ▼, ◄, ►