Pcm Down Sampling; Dynamic Compression - Samsung AK68-01477B User Manual

audio setup

PCM Down Sampling

•
On : Select this when the Amplifi er connected to the player
is not 96KHz compatible. 96KHz signals will be down
converted to 48KHz
•
Off : Select this when the Amplifi er connected to the player
is 96KHz compatible. Signals will be output without any
changes.
M

Even when PCM Down Sampling is set to Off, some discs will only output downsampled audio through the
coaxial and optical digital outputs.
HDMI
•
If your TV is not compatible with compressed multi-channel formats (Dolby Digital, DTS), you should
set Digital Audio to PCM.
•
If your TV is not compatible with LPCM sampling rates over 48kHz, you should set PCM Down
Sampling to On.

Dynamic Compression

This is only active when a Dolby Digital signal is detected.
•
Off : You can enjoy the movie with the standard Dynamic
Range.
•
On : When Movie soundtracks are played at low volume or
from smaller speakers, the system can apply appropriate
compression to make low-level content more intelligible and
prevent dramatic passages from getting too loud.
38_ audio setup
System Setup
Language Setup
Music Digital Output
Audio Setup PCM Down Sampling : On O n
Setup
No Disc No Disc
Display Setup Dynamic Compression : On
HDMI Setup Speaker Setup
Network Setup
Parental Setup
System Setup
Digital Output
Language Setup
Music PCM Down Sampling : On
Audio Setup Dynamic Compression : On On
Setup
No Disc No Disc
Display Setup Speaker Setup
HDMI Setup
Network Setup
Parental Setup
: PCM
Off
: PCM
Off