Setting Up The Speaker Options - Samsung BD-P1200 User Manual

Setting up the Speaker
Options
If you have connected this player to an Amp/Receiver or
Home theater via the 5.1 channel Analog outputs you need
to set the Speaker Options for the best sound.
With the unit in Stop mode, press the MENU
1
button.
Press the
... ... † †
2
the ENTER or √ button.
BD Player
BD
MOVE
Press the
... ... † †
3
press the ENTER or √ button.
BD Player
BD
MOVE
Press the
... ... † †
4
then press the ENTER or √ button.
BD Player
BD
L
Large
LS
Large
A Test Tone
MOVE
40 - English
Downloaded From Disc-Player.com Samsung Manuals
buttons to select Setup, then press
Setup
Language Setup
√ √
Title
Audio Setup
√ √
Display Setup
Music
√ √
HDMI Setup
√ √
Photo
System Upgrade
√ √
Parental Setup
√ √
Setup
SELECT RETURN EXIT
buttons to select Audio Setup, then
Audio Setup
Digital Output : PCM
Title
√ √
PCM Down Sampling : On
√ √
Music
Dynamic Compression : On
√ √
Speaker Setup
√ √
Photo
Setup
SELECT RETURN EXIT
buttons to select Speaker Setup,
Speaker Setup
R
C
Large
Large
LFE
RS
Large
SELECT RETURN EXIT
Press the buttons to select the desired
... ... † † œ √
5
Speaker, then press the ENTER button.
Press the RETURN or œ button to return to
the previous menu.
NOTE
Press the MENU button to exit the menu.
Speaker Setup
Front (L,R) Large, Small
Center (C) Large, Small, None
Surround (LS,RS) Large, Small, None
Subwoofer (SW) LFE, None
Speaker
• Large : Delivers full bandwidth sound with bass below 100 Hz.
• Small : If LFE is on, bass below 100 Hz will outputted
through a Subwoofer instead of the speakers. If LFE is off
and the Front Speaker is set to Large, sound will be
outputted through the Front Speaker.
• None : Select to disable the speakers.
Subwoofer Speaker
• LFE : Select to use the subwoofer speaker.
• None : Select to disable the subwoofer speaker.
(This option can only be selected when the Front (L+R)
speakers are set to Large.)
Press the RED(A) button
• A test tone will be sent to L
LFE in order so you can make sure the speakers are set
up correctly.
• To end the test tone, press the RED (A) button again.
C R RS LS