File Name; Imprinting The Recording Date - Samsung WB500 User Manual

Settings ( )

File name

This function allows the user to select
the le naming format.
File name
After using the reset function, the next le name will be set
Reset from 0001 even after formatting, deleting all or inserting a
new memory card.
New les are named using numbers that follow the previous
Series* sequence, even when a new memory card is used, or after
formatting, or after deleting all pictures.
The rst stored folder name is 100SSCAM, and the rst le
name is SDC10001.
File names are assigned sequentially from SDC10001
SDC10002 ~
The folder number is assigned sequentially from 100 to 999 as
follows: 100SSCAM
Maximum numbers of les in a folder are 9999.
The les used with the memory card conform to the DCF
(Design rule for Camera File systems) format. If you change
the image le name, the image may not play back.
SETTINGS
Format
Reset
Recycle Bin
Reset
File
Imprint Series
Power Off
Back OK
Description
SDC19999.
101SSCAM ~ 999SSCAM.

Imprinting the recording date

There is an option to include DATE/TIME
on still images.
– Sub menus
[Off]*: The DATE & TIME will not be
imprinted on the image le.
[Date]: Only the DATE will be imprinted
Set
on the image le.
[Date&Time]: The DATE & TIME will be imprinted on the image le.
The Date & Time are imprinted at the bottom right side of the still image.
The imprint function is applied only to still images.
Depending on the manufacturer and print mode, the date printed on an
image may not be printed correctly.
SETTINGS
Format
Reset
Recycle Bin
Off
File
Date
Imprint
Date&Time
Power Off
Back OK Set
085