Osd Set; File Name - Samsung SRC-A3 - Genuine Digital Camera NV11 User Manual

Setup menu

[OSD set]

You can check shooting (Recording mode) and displayed image (Play back
mode) information.
Full
Basic
Hide
LCD Save
Date&Time
[Recording mode menu]
[Full] : When the smart button is touched, the icons will be enlarged and
OSD will be displayed.
[Basic] : When the smart button is touched, the icons will be enlarged and
OSD will not be enlarged.
[Hide] : If the camera doesn't operate for about 3 seconds, all OSD will
disappear. When the shutter is pressed down or half way down, the
shutter speed and auto focus frame will display. OSD may display by
using the camera buttons except for the shutter button.
[LCD save] : If the camera is not used for about 30 seconds, the power and
camera status lamps blink and the LCD monitor turns off.
(LCD save is only applied to the Recording mode menu.)
60
Downloaded from www.Manualslib.com
OSD Set
Full
OSD Set
Basic
File
Hide
Language Language
Date&Time
Exit:BACK Exit:BACK
[Play back mode menu]
manuals search engine

[ File name ]

This function allows the user to select the file naming format.
[Series] : New files are named using numbers that
OSD Set
OSD Set
File
[Reset] : After using the reset function, the next file
- The first stored folder name is 100SSCAM, and the first file name is
SNV10001.
- File names are assigned sequentially from SNV10001
SNV19999.
- The folder number is assigned sequentially from 100 to 999 as follows:
100SSCAM
- The files used with the memory card conform to the DCF (Design rule for
Camera File systems) format.
- File names assigned in the Biz mode, will be set SB1ZXXXX
follow the previous sequence, even when
a new memory card is used, or after
formatting, or after deleting all pictures.
name will be set from 0001 even after
formatting, deleting all or inserting a new
memory card.
101SSCAM ~ 999SSCAM.
Series OSD Set
Reset OSD Set
File
Language
Date&Time
Exit:BACK
SNV10002 ~