IDEAL CONCORD SUPER SERIES 4 User Manual

50 to 600 vertical & 250 to 600 horizontal, modular gas fired boilers

Hide thumbs Also See for CONCORD SUPER SERIES 4:

Download this manual

USER GUIDE

IDEAL CONCORD SUPER SERIES 4

50 TO 600 VERTICAL &

250 TO 600 HORIZONTAL,

MODULAR GAS FIRED BOILERS

When replacing any part on this appliance, use only spare parts that you can be assured conform to the safety and performance

speciﬁcation that we require. Do not use reconditioned or copy parts that have not been clearly authorised by Ideal.

For the very latest copy of literature for speciﬁcation and maintenance practices visit our website www.idealcommercialboilers.com

where you can download the relevant information in PDF format.

July 2018

UIN 100921 A03

Page 1: User Guide
When replacing any part on this appliance, use only spare parts that you can be assured conform to the safety and performance speciﬁcation that we require. Do not use reconditioned or copy parts that have not been clearly authorised by Ideal.
Page 2 50 seconds, restart and run for a investigated by a qualified gas/heating engineer. further 15 seconds. The operation is part of the pre-purge safety feature of the Ideal Concord MODULE ELECTRONIC ADJUSTABLE Super boiler. CONTROL THERMOSTAT...
Page 3 In order to ensure safe and reliable operation of DO NOT search with a NAKED flame. Ideal Concord Super boilers it is essential that Should a gas leak be suspected, contact your local regular maintenance be carried out by a competent gas region without delay.
Page 4 Ideal Boilers Ltd. pursues a policy of continuing improvement in the design and performance of its products. The right is therefore reserved to vary speciﬁcation without notice. Ideal is a trademark of Ideal Boilers. Registered Office Ideal Boilers Ltd., PO Box 103, National Avenue, Kingston Upon Hull, HU5 4JN...