Continuous Shot; Metering - Samsung NV11 User Manual

Continuous shot

You can select the type of shooting and the number of continuous shots.
- SINGLE : Take one picture only
- CONTINUOUS : Images will be taken continuously
until the shutter button is released.
The shooting capacity depends on
the memory.
- HIGH SPEED : This takes 3 shots continuously
(2.5 shots per second) when the
shutter is pressed and held down.
- M. CAPTURE : This takes 7 shots per second, when the shutter is pressed
and held down. After completing the continuous shooting,
images are saved and the images play back on the Rear
LCD. The maximum number of shots is 20 and the image
size is fixed as 1024X768.
- AEB : Take three pictures in a series using different exposures : Short
exposure (-1/2EV), standard exposure(0.0EV) and over exposure
(+1/2EV).
Use this mode if it is hard to decide exposure of the object.
High resolution and picture quality increases file saving time, which increases
stand-by time.
If the [CONTINUOUS], [HIGH SPEED], [M. CAPTURE] or [AEB] sub menu is
selected, the flash is switched off automatically.
It is best to use a tripod for the AEB shooting as the time to save each image
file is longer and blurring caused by camera shake may occur.
When the [M.CAPTURE] menu is selected, you only can select ISO AUTO,
400, 800, 1600
32
If you cannot obtain suitable exposure conditions, you can change the metering
method to take brighter pictures.
AEB
- MULTI
M. CAPTURE
HIGH SPEED
CONTINUOUS
SINGLE
[Still image mode]
- SPOT
- CENTER : Exposure will be calculated based on an average of the available
If the subject is not the centre of the focus area, do not use the spot metering
as this may result in an exposure error. In this circumstance, it is better to use
exposure compensation.

Metering

: Exposure will be calculated based on
an average of the available light in the
image area. However, the calculation
will be biased towards the centre of the
image area. This is suitable for general
use.
: Only the rectangular area in the centre
of the LCD monitor will be metered for
light. This is suitable when you want the subject in the centre
correctly exposed, regardless of the back lighting.
light in the image area. However, the calculation will be biased
towards the centre of the image area. This is suitable for taking a
picture of small object like a flower or insects.
CENTER
SPOT
MULTI
[PROGRAM mode]