Metering; Continuous Shot - Samsung CJ050501C User Manual

User manual
Table of Contents

Advertisement

Metering

■ If you cannot obtain suitable exposure conditions, you can change the metering
method to take brighter pictures.
- [Multi] : Exposure will be calculated based on an
average of the available light in the image
area. However, the calculation will be
biased towards the centre of the image
area. This is suitable for general use.
- [Spot] : Only the rectangular area in the centre of
the LCD monitor will be metered for light.
This is suitable when the subject in the
centre is exposed correctly, regardless of the back lighting.
※ If the subject is not the centre of the focus area, do not use the spot metering
as this may result in an exposure error. In this circumstance, it is better to use
exposure compensation.
■ You can select continuous shot, and AEB (Auto Exposure Bracketing).
- [Single]
- [Wise Shot]
6
- [Continuous]
METERING
Multi
[ PROGRAM mode ]
- [AEB]
- [Motion Capture] : This takes 30 shots per second, when the shutter is pressed
INFORMATION
● High resolution and picture quality increases file saving time, which
● Wise shot is available in the ASR mode only(p.16)
● If the [Continuous], [AEB] or [Motion Capture] sub menu is selected, the
● If less than 3 pictures are available in the memory, the AEB shooting is not
● It is best to use a tripod for the AEB shooting as the time to save each

Continuous shot

: Take one picture only.
: 2 images are taken at a time.
One is taken in the Fill-In Flash
mode and the other is taken in
the ASR mode.
: Images will be taken
continuously until the shutter
button is released. The shooting
capacity depends on the memory.
: Take three pictures in a series in different exposures:
standard exposure (0.0EV), short exposure (-1/3EV) and
over exposure (+1/3EV).
and held down. After completing the continuous shooting,
images are saved and the images play back on the Rear
LCD. The maximum number of shots is 30. Image size is
1024X768 and quality is fixed as normal.
increases stand-by time.
flash will be off automatically.
available.
image file is longer and blurring caused by camera shake may occur.
6
DRIVE
Single
[ PROGRAM mode ]
《47》

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

S1050

Table of Contents