Quick View; Quick View; Auto Power Off; Lcd Save - Samsung i170 User Manual

Setup menu 2 (

[ Quick view ]

If you enable Quick View before capturing an image, you can view the image
you just captured on the LCD monitor for the duration set in the [Quick View]
setup. Quick view is possible only with still images.
Sub menus

[Off]

: The quick view function can't be
activated.
[0.5, 1, 3 sec] : The captured image is briefly
displayed during the selected time.

[ Auto power off ]

This function switches the camera off after a set amount of time in order to
prevent unnecessary battery drainage.
Sub menus
[1, 3, 5, 10 min] : The power will turn off
automatically if not used for the
period of time specified.
- After replacing the battery, the power off setting
will be preserved.
- Note that the automatic power off function will not
operate if the camera is in the PMP, MP3, Text Viewer mode, PC / Printer
mode, slide show, playing back a voice recording and playing back a movie
clip.
)
SETUP2

Quick View

Off
Power Off 0.5 sec

LCD Save

1 sec
Video Out 3 sec
Set Password
Format
Back OK Set
SETUP2
Quick View
Power Off 1 min
LCD Save 3 min
Video Out 5 min
Set Password 10 min
Format
Back OK Set
[ LCD save ]
If you set the [LCD save] to On and the camera isn't operated during the
specified time, the LCD monitor will be turned off automatically.
[LCD save] sub menu
[Off] : The LCD monitor will not be turned off.
[On] : If you select the [LCD Save] and the
camera isn't operated during the specified
time (about 30 SEC.), the camera power
will be idle (LCD monitor : OFF, Camera
status lamp : Blinking) automatically.
SETUP2
Quick View
Power Off
LCD Save Off
Video Out On
Set Password
Format
Back Set
OK
81