Starting Pc Mode - Samsung i170 User Manual

Setting up the application software
The XviD codec is distributed according to and under the terms and conditions of
the GNU General Public License and everyone can copy, modifiy and distribute
this codec freely, but WITHOUT ANY WARRANTY, IMPLIED OR
EXPRESSED, OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE; provided, however, that you have to follow the GNU General Public
License whenever you are distributing this codec or modification thereof.
For more information see the GNU General Publice License documents
(http://www.gnu.org/copyleft/gpl.html).
5. After restarting the computer, connect the PC
to the camera with the USB cable.
6. Turn the camera power on.
The [Found New Hardware Wizard] will open
and the computer will recognize the camera.
If your OS is Windows XP, an image viewer
program will open.
If the download window of Digmax Master opens after starting Digimax
Master, the camera driver was setup successfully.
INFORMATION
If you have installed the camera driver, the [Found New Hardware Wizard]
may not open.
On a Windows 98 SE system, the Found New Hardware Wizard dialog box
opens and a window asking you to select a driver file may appear. In this
case, specify "USB Driver" in the CD supplied.
104

Starting PC mode

In this mode, you can download stored images to your PC through the USB
cable.
The LCD monitor is always turned off in PC mode.
Connecting the camera to a PC
1. Connect the PC to the camera with the USB
cable.
2. Select the [Computer] menu by using the Smart
button.
If you selected [Printer] in Step 2, when you connect the camera to your
printer, the [Connecting Printer] message will display and the connection will
not be established. In this case, disconnect the USB cable, and then follow
the procedure from Step 1 and onward.
Computer
Printer
OK Confirm