Select Menu (Selc) - Siemens SITRANS RD200 Operating Instructions Manual

SITRANS RD200 can also be connected directly to another RD200 meter through a cable
assembly (SITRANS RD200 Meter Copy Cable). This allows the user to copy all the
settings from one meter to another, using the Copy function. (See
(CoPY) on page 47
See SITRANS RD Serial Adapters Instruction Manual for more details.

Select menu (SELc)

The Select menu (
display intensity (
out
( ) is a factory setting depending on the option installed.
WARNING: Output options are installed and set up at the factory.
Changing the output selection (
of the meter. Do not change output selection!
Linear or square root function (Linr or Sqrt)
Meters are set up at the factory for linear function. The linear function provides a display
that is linear with respect to the input signal.
The square root function is used to linearize the signal from a differential pressure
transmitter and display flow rate in engineering units.
1. Press and hold Right arrow
Advanced Features menu of the meter.
2. Press Up arrow
When the Select menu (
menu.
3. Press Ent/Ack
4. Use Up arrow
Square Root (
5. Press Ent/Ack
6. Press Menu
Low-flow cutoff (cut F)
The low-flow cutoff feature allows the meter to be programmed so that the often-
unsteady output from a differential pressure transmitter, at low flow rates, always
displays zero on the meter.
7ML19985JS01
.)
SELc
) is used to select linear (
inty
), and low-flow cutoff (
to scroll through the Advanced Features Menu options.
SELc
) is displayed, press Ent/Ack
to access the Funtion menu (
to scroll between function selections; Linear (
Sqrt
).
to accept the desired display setting.
to exit at any time.
SITRANS RD200 – OPERATING INSTRUCTIONS
Linr
) or square root (
cut F
). Selection for relay or analog output
out
) will cause erroneous operation
and Menu for three seconds to access
Func
).
Meter copy function
Sqrt
) function,
to access the
Linr
) and
Page 45