Display Functions And Messages - Siemens SITRANS RD200 Operating Instructions Manual

Press Menu
Press Right arrow
Press Up arrow
value of a digit.
Press Enter/Ack
Press and hold Right arrow
Advanced Features menu of the meter.

Display functions and messages

The following table shows the displayed functions and messages with their action/setting
description.
Display Parameter
Setup
SEtu
Input
inPt
4-20 mA
4-20
0-10 VDC
0-10
RTD
rtd
Alpha 385
A385
Alpha 392
A392
TC
tC
0 J
0 J
1 K
1 k
2 T
2 T
3 T.0
3 t.0
4 E
4 E
°F or °C
F C
°F °F
°C °C
Decimal point
dEc.P
Relay
rELy
Relay1
rLY1
Action1
Act1
Automatic
Auto
Auto-manual
A-m
Latching
LtCH
Latching-cleared
L-CL
Page 18
to enter or exit Program Mode at any time.
to move to the next digit during programming.
to scroll through the menus, decimal point, or to increment the
to access a menu or to accept a setting.
and Menu
Action/Setting
Enter Setup menu
Enter Input menu
Set meter for 4 to 20 mA input
Set meter for ±10 VDC input
Set meter for RTD input
Set α = 0.00385 European curve 100Ω RTD
Set α = 0.00392 American curve 100Ω RTD
Set meter for TC input
Type J
Type K
Type T
Type T, 0.1° resolution
Type E
Set temperature scale
Set meter to Fahrenheit
Set meter to Celsius
Set decimal point for process inputs
Enter the Relay menu
Relay 1 setup
Set relay 1 action (automatic, latching, etc.)
Set relay for automatic reset
Set relay for automatic + manual reset any
time
Set relay for latching operation
Set relay for latching operation with manual
reset only after alarm condition has cleared
SITRANS RD200 – OPERATING INSTRUCTIONS
for three seconds to access
7ML19985JS01