Initial Value Change List - Mitsubishi Electric FR-D720S SC EC Instruction Manual

Operation panel
4.3.10

Initial value change list

Displays and sets the parameters changed from the initial value.
NOTES
Calibration parameters (C1 (Pr. 901) to C7 (Pr. 905)) are not displayed even they are
changed from the initial settings.
Only simple mode parameter is displayed when simple mode is set (Pr. 160 "Extended func-
tion display selection" = 9999 (displays only the simple mode parameters)).
Pr. 160 "Extended function display selection" is displayed independently of whether the set-
ting value is changed or not.
When parameter setting is changed after creating the initial value change list, the setting will
be reflected to the initial value change list next time.
4 - 18
Operation