Start Up Sound; Shutter Sound; Important Notes - Samsung DIGIMAX S600 User Manual

Start up sound

You can select the sound that is activated whenever the camera is turned on.
Start up sound : [Off], [Sound 1], [Sound 2], [Sound 3]
- If the start up image is set to [Off], the start up sound
will not activate, even though you may have set
these to on.

Shutter sound

You can select the shutter sound.
Shutter sound : [Off], [Sound 1], [Sound 2], [Sound 3]
Be sure to observe the following precautions!
This unit contains precision electronic components. Do not use or store this unit
MYCAM
in the following locations.
Start Image Off
- Areas exposed to severe changes in temperature and humidity.
Start Sound Sound 1
Shutter Sound Sound 2
- Areas exposed to dust and dirt.
Sound 3
- Areas exposed to direct sunlight or the inside of a vehicle in hot weather.
Back: Set:OK
- Environments where there is high magnetism or excessive vibration.
- Areas with high explosives or highly flammable materials.
Do not leave this camera in places subject to dust, chemicals (like naphthalene
and mothball), high temperature and high humidity.
Keep this camera with silica gel in a hermetically sealed box when not planning
to use the camera for a long period of time
Sand can be particularly troublesome to cameras.
- Do not let sand get inside the camera when using it on beaches, coastal
dunes, or other areas where there is lots of sand.
- Doing so may result in failure or may permanently render the camera unusable.
Handling the camera
MYCAM
Start Image Off - Never drop the camera or subject it to severe shocks or vibrations.
Start Sound Sound 1
- Protect the large size LCD monitor from an impact. When this camera is not
Shutter Sound Sound 2
Sound 3
used, keep it in the camera case.
Back: Set:OK
- Avoid obstructing the lens or the flash when you capture an image.
- This camera is not waterproof.
To avoid dangerous electrical shocks, never hold or operate the camera with
wet hands.
- If you use this camera in wet places, such as beach or pool, do not let water or
sand get inside the camera. Doing so may result in failure or may permanently
damage the unit.

Important notes

59