Pictbridge : Picture Selection; Pictbridge : Print Setting - Samsung DIGIMAX S600 User Manual

PictBridge : Picture Selection

If you selected [Computer] in Step 4, when you connected the camera to your
printer, the [Connecting Computer] message will display and the connection will
not be established. In this case, disconnect the USB cable, and then follow the
procedure from Step 2 and onward. Or, press the Printer button and the camera
is connected to the printer displaying the [Connecting Printer] message. But, the
camera may not connect to the printer, depending on the make and model of the
printer.
Easy printing
When you connect the camera to printer in the Play
back mode, you can print a picture easily.
- Pressing the printer( ) button :
Currently displayed image will be printed with the
printer's default setting.
- Pressing the Left / Right button :
Selects a previous / next image.
Select pictures to print
1. Press the Menu button.
2. The [IMAGES] menu will appear.
3. Use the UP and DOWN buttons to select the
desired sub menu value, and then press the OK
button.
When [One Pic] is selected
When [All Pics] is selected
50
Print:
IMAGES
One Pic
All Pics
Exit:MENU
: The PictBridge
function will be
applied only to the picture currently displayed.
: The PictBridge function will be applied to all
pictures, excluding movie clips and voice files.
Setting the Number of Copies to Print
- Select [One Pic] or [All Pics]. A screen where you can set the number of copies
to print will appear as shown below.
PREV
Exit:Shutter
[When [One Pic] is selected]
- Press the Up / Down button to select the number of prints.
- When [One Pic] is selected : Use the Left / Right button to select another
picture. After selecting another picture, select the number of prints for another
Menu:OK
picture.
- After setting the number of prints, press the OK button to save.
- Press the Shutter button to return to the menu without setting the number of
prints.

PictBridge : Print Setting

AUTO SET
Move:
1. Use the LEFT and RIGHT buttons to select the
[AUTO SET] menu tab.
2. Use the UP and DOWN buttons to select the
desired sub menu value, and then press the OK
button.
[No] : [CUSTOM SET] values are kept.
[Yes] : All values in the [CUSTOM SET] are
automatically changed.
0
NEXT
Set:OK Exit:Shutter
[When [All Pics] is selected]
0
Set:OK
AUTO SET
No
Yes
Exit:MENU Move: