Special Effect : Photo Frame
You can add 9 types of frame-like borders to a still image you want to capture.
1. Press the E button in any recording mode
(except for MOVIE CLIP and AUTO mode).
2. Select the (
) menu by pressing the Left /
Right button.
3. Select a desired sub menu by pressing the Up /
Down button and press the OK button.
-
: The photo frame will not be added.
4. The photo frame will appear.
Press the shutter button to capture an image
Before taking a picture, you can change the frame by
pressing the + / - button. Change the frame type by
pressing the Up / Down / Left / Right button.
28
You can use the + / - button to adjust the values for the RGB, ISO, white balance
and exposure compensation.
Main menu
Photoframe
WHITE BALANCE
Exposure compensation
RGB : Allows the user to adjust the R (Red), G (Green), and B (Blue) values of
Setting RGB Values
1. Press the + / - button, and then use the UP and
DOWN buttons to select the RGB icon (
The RGB menu bar will appear as shown.
2. Use the UP / DOWN / LEFT and RIGHT
buttons to select the desired RGB value.
- Up / Down Button : Navigates between R, G,
- Left / Right Button : Changes value of each icon.
3. When you press the + / - button again, the value you set will be saved and
RGB setup mode will end.
When special effect (colour) from the icon other than
be able to select the RGB.
Capture:Shutter
Frame:+/-
+ / - button
Sub menu
RGB
R (Red), G (Green), B (Blue)
ISO
AUTO, 50, 100, 200, 400
AUTO, DAYLIGHT, CLOUDY,
FLUORESCENT H,
FLUORESCENT L, TUNGSTEN,
CUSTOM.
-2.0~0.0~+2.0 (0.5EV steps)
the images to be captured.
and B icons.
Available camera mode
).
is selected, it will not