Replacing The M.2 Solid-State Drive - Lenovo V330-20ICB User Manual

Figure 41. Removing the power button board
Note: Before you install the new power button board, ensure that you disconnect the cable from the
failing power button board and connect it to the new one.
Figure 42. Installing the power button board
5. Reinstall the removed parts. To complete the replacement, see "Completing the parts replacement" on
page 47.

Replacing the M.2 solid-state drive

Attention: Do not open your computer or attempt any repairs before reading the Important Product
Information Guide.
1. Remove the computer stand. See "Replacing the computer stand" on page 14.
2. Remove the computer cover. See "Removing the computer cover" on page 16.
3. Remove the system board shield. See "Replacing the system board shield" on page 20.
4. Depending on your computer model, refer to one of the following to replace the M.2 solid-state drive.
• Type 1
.
Chapter 4 Replacing hardware
29