Installation - Mira Advance Installation, Operation, Maintenance Manual

Section
7
1. 1. 1. 1. 1. Mir Mir Mir a Adv a Adv ance ance
Mir Mira Adv a Adv a Advance ance ance
Read the section "Important Safety Information"
WARNING! Isolate the electrical and water supplies before proceeding with the WARNING! WARNING!
WARNING! WARNING!
installation of the Mira Advance.
Note! Bottom inlet is illustrated for clarity in these instructions. Note! Note! Note! Note!
1.1. 1.1. 1.1. To remove the Mira Advance case
1.1. 1.1.
remove the screw at the bottom of
the case.
1.2. 1.2. 1.2. Pull the bottom of the Mira Advance
1.2. 1.2.
cover outwards and upwards off the
case.
1.3. 1.3.
1.3. Slide out the inlet shield, located 1.3. 1.3.
over the inlet connector assembly.
1.4. 1.4.
1.4. 1.4. Unscrew the transit sealing caps from 1.4.
the inlet and outlet of the Mira
Advance.
1.5. 1.5. 1.5. 1.5. 1.5. When installing the Mira Advance
with concealed water and electrical
supplies refer to, "Dimensions:
Water and cable entry points". Water and cable entry points".
Water and cable entry points". Water and cable entry points". Water and cable entry points".
16 16
16 16 16
"Important Safety Information" "Important Safety Information"
"Important Safety Information" first. "Important Safety Information"
, "Dimensions: , "Dimensions:
, "Dimensions: , "Dimensions:

Installation

Installation Installation
Installation Installation
Wire 78 Multi-
connector
Screw
Inlet Shield
Transit
Sealing Cap
(outlet)