Radio Shack PRO-2055 User Manual page 76

Beyond the Basics
2. Press FUNC then e or d to select the desired bank.
3. Press MODE and select Motorola trunking mode.
4. Press FUNC then 3. Use Up/Down keys to set 800MHz
Motorola ch plan NORMAL appears.
5. Press e or d to select NORMAL or SPLINTER and
press ENT.
• If you are uncertain about the base frequency, use
the default setting. The default setting is normal.
• If you cannot receive with the normal setting,
change to OFFset. The base frequency in normal
is 851.0125 MHz. The base frequency in OFFset is
851.0000 MHz.
programming fl eet maps
You must set the fl eet map if you want to receive a
Motorola Type I system. Fleet maps are included along
with other information about Motorola Type I systems
at www.trunkscanner.com.
Follow these steps to program a fl eet map.
1. Press PROG then TRUNK.
2. For each bank you want to program, repeatedly
press FUNC. Then e or d to select the bank.
3. Press FUNC. Then press 8. Size Code Setting appears.
76